| Net Power Range (Tier 4) |
179 HP (133 kW) |
| Operating Weight – Typically Equipped |
42647 lb (19344 kg) |
| Blade Width |
12 ft (3.7 m) |
| Engine Model |
Cat® C9.3 |
| Gross Vehicle Weight – Maximum – Front Axle |
17075 lb (7745 kg) |
| Gross Vehicle Weight – Maximum – Rear Axle |
38069 lb (17268 kg) |
| Operating Weight – Typically Equipped – Front Axle |
12055 lb (5468 kg) |
| Operating Weight – Typically Equipped – Rear Axle |
30592 lb (13876 kg) |
| Gross Vehicle Weight – Base – Front Axle |
9343 lb (4238 kg) |
| Gross Vehicle Weight – Base – Rear Axle |
28077 lb (12736 kg) |
| Gross Vehicle Weight – Maximum – Total |
55144 lb (25013 kg) |
| Bore |
4.5 in (115 mm) |
| Stroke |
5.9 in (149 mm) |
| Top Speed – Forward |
29 mile/h (46.6 km/h) |
| Top Speed – Reverse |
23 mile/h (36.8 km/h) |
| Turning Radius – Outside Front Tires |
25.59 ft (7.8 m) |
| Steering Range – Left/Right |
50° |
| Articulation Angle – Left/Right |
20° |
| Fuel Capacity |
104 gal (US) (394 l) |
| Speed at Rated Power |
2,000 rpm |
| Forward/Reverse Gears |
8 Forward/6 Reverse |
| Transmission |
APECS, Direct Drive, Powershift |
| Brakes – Service |
Multiple Oil Disc |
| Brakes – Service – Surface Area |
3565 in² (23000 cm²) |
| Circuit Type |
Parallel |
| Pump Type |
Variable Piston |
| Pump Output |
55.7 gal/min (210 l/min) |
| Maximum System Pressure |
3500 psi (24150 kPa) |
| Reservoir Tank Capacity |
16.9 gal (US) (64 l) |
| Drawbar – Width |
3 in (76.2 mm) |
| Standby Pressure |
885 psi (6100 kPa) |
| Forward – 1st |
2.5 mile/h (4.1 km/h) |
| Forward – 2nd |
3.4 mile/h (5.5 km/h) |
| Forward – 3rd |
5 mile/h (8 km/h) |
| Forward – 4th |
6.9 mile/h (11 km/h) |
| Forward – 5th |
10.6 mile/h (17.1 km/h) |
| Forward – 6th |
14.5 mile/h (23.3 km/h) |
| Forward – 7th |
19.9 mile/h (32 km/h) |
| Forward – 8th |
29 mile/h (46.6 km/h) |
| Reverse – 1st |
2 mile/h (3.2 km/h) |
| Reverse – 2nd |
3.7 mile/h (6 km/h) |
| Reverse – 3rd |
5.4 mile/h (8.7 km/h) |
| Reverse – 4th |
8.4 mile/h (13.5 km/h) |
| Reverse – 5th |
15.7 mile/h (25.3 km/h) |
| Reverse – 6th |
23 mile/h (36.8 km/h) |
| Brakes – Parking |
Multiple Oil Disc |
| Brakes – Secondary |
Dual Circuit |
| Circle – Diameter |
60.2 in (1530 mm) |
| Circle – Blade Beam Thickness |
1.6 in (40 mm) |
| Drawbar – Height |
6 in (152 mm) |
| Moldboard – Height |
24 in (610 mm) |
| Moldboard – Thickness |
0.87 in (22 mm) |
| Arc Radius |
16.3 in (413 mm) |
| Throat Clearance |
6.5 in (166 mm) |
| Cutting Edge Width |
6 in (152 mm) |
| Cutting Edge Thickness |
0.6 in (16 mm) |
| End Bit – Width |
6 in (152 mm) |
| End Bit – Thickness |
0.6 in (16 mm) |
| Blade Pull – Base GVW |
25269 lb (11462 kg) |
| Blade Pull – Maximum GVW |
34262 lb (15541 kg) |
| Blade Down Pressure – Base GVW |
16038 lb (7275 kg) |
| Circle Centershift – Right |
28.7 in (728 mm) |
| Circle Centershift – Left |
27.4 in (695 mm) |
| Blade Down Pressure – Maximum GVW |
29309 lb (13294 kg) |
| Moldboard Sideshift – Right |
26 in (660 mm) |
| Moldboard Sideshift – Left |
20.1 in (510 mm) |
| Maximum Blade Position Angle |
90° |
| Blade Tip Range – Forward |
40° |
| Blade Tip Range – Backward |
5° |
| Maximum Shoulder Reach Outside of Tires – Right |
77.9 in (1978 mm) |
| Maximum Shoulder Reach Outside of Tires – Left |
70.5 in (1790 mm) |
| Maximum Lift Above Ground |
18.9 in (480 mm) |
| Maximum Depth of Cut |
28.1 in (715 mm) |
| Cooling System |
15 gal (US) (57 l) |
| Hydraulic System – Total |
26.4 gal (US) (100 l) |
| Hydraulic System – Tank |
16.9 gal (US) (64 l) |
| Brakes |
ISO 3450 |
| Steering |
ISO 5010 |
| Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holder Spacing |
4.6 in (116 mm) |
| Front, V-Type, 5 or 11 Tooth – Scarifying Depth, Maximum |
18.4 in (467 mm) |
| Mid, V-Type – Scarifier Shank Holders |
11 |
| Rear – Scarifying Depth, Maximum |
16.8 in (426 mm) |
| Front, V-Type, 5 or 11 Tooth – Working Width |
40.6 in (1031 mm) |
| Front, V-Type – Working Width |
47.4 in (1205 mm) |
| Mid, V-Type – Scarifying Depth, Maximum |
11.5 in (292 mm) |
| Mid, V-Type – Working Width |
46.6 in (1184 mm) |
| Mid, V-Type – Scarifier Shank Holder Spacing |
4.6 in (116 mm) |
| Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holders |
11-May |
| Sound |
ISO 6394; ISO 6395 |
| Moldboard – Blade Width |
12 ft (3.7 m) |
| Gross Vehicle Weight – Base – Total |
37420 lb (16974 kg) |
| Operating Weight – Typically Equipped – Total |
42647 lb (19344 kg) |
| Ripper Shank Holder Spacing |
21 in (533 mm) |
| Ripping Depth – Maximum |
16.8 in (426 mm) |
| ROPS/FOPS |
ISO 3471/ISO 3449 |
| VHP Plus – Gear – Net Power – Forward 4th |
210 HP (156 kW) |
| Circle – Height |
5.4 in (138 mm) |
| Base Power (1st Gear) – Net – Metric |
181 HP (133 kW) |
| High Ambient – Fan Speed – Standard |
1,400 rpm |
| Emissions |
U.S. EPA Tier 4 Final/EU Stage V |
| VHP Plus Range – Net |
133-172 kW (179-231 hp) |
| Diesel Exhaust Fluid |
5.8 gal (US) (22 l) |
| Transmission – Differential – Final Drives |
18.5 gal (US) (70 l) |
| VHP Plus – Gear – Net Power – Reverse 1st |
179 HP (133 kW) |
| VHP Plus – Gear – Net Power – Forward 6th |
220 HP (164 kW) |
| VHP Plus Range – Net – Metric |
133-172 kW (181-234 hp) |
| VHP Plus – Gear – Net Power – Reverse 2nd |
189 HP (141 kW) |
| Front Frame Structure – Height |
12.6 in (321 mm) |
| VHP Plus – Gear – Net Power – Forward 1st |
179 HP (133 kW) |
| Front Frame Structure – Width |
12 in (305 mm) |
| VHP Plus – Gear – Net Power – Forward 5th |
215 HP (160 kW) |
| Standard Capability |
109 °F (43 °C) |
| Maximum Torque – VHP Plus |
840 lb/ft (1138 N·m) |
| VHP Plus – Gear – Net Power – Reverse 3rd-6th |
200 HP (149 kW) |
| VHP Plus – Gear – Net Power – Forward 2nd |
189 HP (141 kW) |
| VHP Plus – Gear – Net Power – Forward 7th |
225 HP (168 kW) |
| VHP Plus – Gear – Net Power – Forward 3rd |
200 HP (149 kW) |
| VHP Plus – Gear – Net Power – Forward 8th |
231 HP (172 kW) |
| Torque Rise |
38% |
| Displacement |
567.5 in³ (9.3 l) |
| Ripper Shank Holders |
5 |
| Drawbar – Thickness |
0.5 in (12.7 mm) |
| Penetration Force |
20812 lb (9440 kg) |
| Pry-Out Force |
27794 lb (12607 kg) |
| Machine Length Increase, Beam Raised |
40.6 in (1031 mm) |
| Rear – Working Width |
84 in (2133 mm) |
| Rear – Scarifier Shank Holders |
9 |
| Rear – Scarifier Shank Holder Spacing |
10.5 in (267 mm) |
| Front-Top/Bottom Plate – Width |
12 in (305 mm) |
| Front-Top/Bottom Plate – Thickness |
0.87 in (22 mm) |
| Front Axle – Height to Center |
23.5 in (596 mm) |
| Front Axle – Wheel Lean – Left/Right |
18° |
| Front Axle – Total Oscillation per Side |
32° |
| Number of Cylinders |
6 |
| Derating Altitude |
10000 ft (3050 m) |
| High Ambient – Fan Speed – Maximum |
1,550 rpm |
| High Ambient – Fan Speed – Minimum |
500 rpm |
| High – Ambient Capability |
122 °F (50 °C) |
| Height |
19.9 in (506 mm) |
| Width |
7.9 in (201 mm) |
| Sidewall Thickness – Inner |
0.63 in (16 mm) |
| Sidewall Thickness – Outer |
0.71 in (18 mm) |
| Drive Chain Pitch |
2 in (50.8 mm) |
| Wheel Axle Spacing |
60 in (1523 mm) |
| Tandem Oscillation – Front Up |
15° |
| Tandem Oscillation – Front Down |
25° |
| Height – Top of Cab |
130 in (3308 mm) |
| Length – Counterweight to Ripper |
399 in (10136 mm) |
| Width – Outside Front Tires |
98.9 in (2511 mm) |
| Length – Front Axle to Mid Tandem |
241 in (6123 mm) |
| Length – Front Tire to Rear of Machine |
351 in (8912 mm) |
| Length – Front Axle to Moldboard |
100 in (2552 mm) |
| Length – Between Tandem Axles |
60 in (1523 mm) |
| Width – Outside Rear Tires |
98.9 in (2511 mm) |
| Width – Tire Center Lines |
84.3 in (2140 mm) |
| Height – Front Axle Center |
23.5 in (596 mm) |
| Height – Exhaust Stack |
128 in (3256 mm) |
| Height – Top of Cylinders |
120 in (3040 mm) |
| Ground Clearance – Rear Axle |
13.3 in (339 mm) |
| Engine Oil |
7.9 gal (US) (30 l) |
| Tandem Housing – Each |
20 gal (US) (76 l) |
| Front Wheel Spindle Bearing Housing |
0.13 gal (US) (0.5 l) |
| Circle Drive Housing |
1.8 gal (US) (7 l) |
