Specifications
| Net Power – ISO 9249 | 300 HP (223.5 kW) |
| Operating Weight | 81100 lb (36800 kg) |
| Maximum Digging Depth | 26.11 ft (8210 mm) |
| Net Power – ISO 9249 (DIN) | 304 hp (metric) (304 hp (metric)) |
| Engine Model | Cat C7.1 TTA |
| Engine Power – ISO 14396 | 302 HP (225 kW) |
| Engine Power – ISO 14396 (DIN) | 306 hp (metric) (306 hp (metric)) |
| Bore | 4 in (105 mm) |
| Stroke | 5 in (135 mm) |
| Main System – Maximum Flow | 148 gal/min (560 l/min) |
| Displacement | 428 in³ (7.01 l) |
| Biodiesel Capability | Up to B20¹ |
| Maximum Pressure – Equipment | 5076 psi (35000 kPa) |
| Emissions | Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards. |
| Maximum Pressure – Equipment – Lift Mode | 5511 psi (38000 kPa) |
| Maximum Pressure – Travel | 5076 psi (35000 kPa) |
| Note (1) | Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture. |
| Note (2) | ¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. |
| Maximum Pressure – Swing | 4264 psi (29400 kPa) |
| Swing Speed | 8.84 r/min (8.84 r/min) |
| Maximum Swing Torque | 105250 ft·lbf (143 kN·m) |
| Fuel Tank Capacity | 158.5 gal (US) (600 l) |
| Cooling System | 10.2 gal (US) (39 l) |
| Engine Oil | 6.6 gal (US) (25 l) |
| Swing Drive – Each | 4.8 gal (US) (18 l) |
| Final Drive – Each | 2.1 gal (US) (8 l) |
| Hydraulic System – Including Tank | 98.5 gal (US) (373 l) |
| Hydraulic Tank | 42.5 gal (US) (161 l) |
| DEF Tank | 13.2 gal (US) (50 l) |
| Boom | Reach 6.5 m (21’4″) |
| Stick | Reach 3.9 m (12’10”) |
| Bucket | HD 2.00 m³ (2.61 yd³) |
| Shipping Height – Top of Cab | 10.5 ft (3180 mm) |
| Handrail Height | 10.5 ft (3180 mm) |
| Shipping Length | 36.8 ft (11180 mm) |
| Tail Swing Radius | 11.7 ft (3530 mm) |
| Counterweight Clearance | 4.2 ft (1260 mm) |
| Ground Clearance | 1.8 ft (510 mm) |
| Track Length | 16.6 ft (5030 mm) |
| Track Length to Center of Rollers | 13.3 ft (4040 mm) |
| Track Gauge | 9 ft (2740 mm) |
| Transport Width | 10.5 ft (3190 mm) |
| Transport Width – 850 mm (33”) Shoes | 11.9 ft (3590 mm) |
| Boom | Reach 6.5 m (21’4″) |
| Stick | Reach 3.9 m (12’10”) |
| Bucket | HD 2.00 m³ (2.61 yd³) |
| Maximum Reach at Ground Level | 38.7 ft (11760 mm) |
| Maximum Cutting Height | 35.3 ft (10740 mm) |
| Maximum Loading Height | 24.6 ft (7470 mm) |
| Minimum Loading Height | 6.2 ft (1890 mm) |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom | 26.6 ft (8080 mm) |
| Maximum Vertical Wall Digging Depth | 21.4 ft (6490 mm) |
| Bucket Digging Force – ISO | 47190 lbf (210 kN) |
| Stick Digging Force – ISO | 32480 lbf (144 kN) |
| Recyclability | 98% |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes. |
