Specifications
| Engine Power @ 1,600 rpm – ISO 14396:2002 | 339 HP (253 kW) |
| Operating Weight | 54858 lb (24890 kg) |
| Bucket Range | 2.8-14.0 m³ 3.75-18.25 yd³ |
| Gross Power @ 1,600 rpm – SAE J1995:2014 | 342 HP (256 kW) |
| Engine Model | Cat C9.3B |
| Net Power @ 1,600 rpm – ISO 9249:2007, SAE J1349:2011 | 321 HP (239 kW) |
| Note (1) | Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, China Nonroad Stage IV and Japan 2014 emission standards. |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Net Torque @ 1,200 rpm – ISO 9249:2007, SAE J1349:2011 | 1316 ft-lb (1785 N·m) |
| Note | Weight based on a machine configuration with Bridgestone 26.5R25 VJTL3 radial tires, full fluids, operator, standard counterweight, ride control,cold start, roading fenders, Product Link, front manual differential/openrear axles, power train guard, secondary steering, sound suppression,and a 4.8 m³ (6.25 yd³) general purpose bucket with BOCE. |
| Forward – 1 | 4.1 mile/h (6.7 km/h) |
| Forward – 2 | 8.4 mile/h (13.4 km/h) |
| Forward – 3 | 15 mile/h (24.1 km/h) |
| Forward – 4 | 24.5 mile/h (39.5 km/h) |
| Note | Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 849 mm (33 in) roll radius. |
| Reverse – 1 | 4.5 mile/h (7.3 km/h) |
| Reverse – 2 | 9.2 mile/h (14.8 km/h) |
| Reverse – 3 | 16.5 mile/h (26.6 km/h) |
| Reverse – 4 | 24.5 mile/h (39.5 km/h) |
| Note (1) | ** For machines in European Union countries and in countries that adopt the EU Directives. |
| Note (2) | ***European Union Directive 2000/14/EC as amended by 2005/88/EC. |
| With Cooling Fan Speed at 70% of Maximum Value – Exterior Sound Power Level* | 108 |
| With Cooling Fan Speed at 70% of Maximum Value – Operator Sound Pressure Level (ISO 6396:2008) | 69 dB(A) (69 dB(A)) |
| With Cooling Fan Speed at Maximum Speed – Exterior Sound Power Level (ISO 6395:2008) | 109 dB(A) (109 dB(A)) |
| With Cooling Fan Speed at Maximum Speed – Exterior Sound Pressure Level (SAE J88:2013) | 76 |
| With Cooling Fan Speed at Maximum Speed – Operator Sound Pressure Level (ISO 6396:2008) | 70 dB(A) (70 dB(A)) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons). |
| Breakout Force | 44072 lb (196 kN) |
| Note (1) | For a machine configuration as defined under Weight. |
| Note (2) | Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load – Full 40° Turn – No Tire Deflection | 17505 kg (35582 lb) |
| Static Tipping Load – Full 40° Turn – With Tire Deflection | 35919 lb (16297 kg) |
| Cooling System | 17.4 gal (US) (66 l) |
| Crankcase | 6.1 gal (US) (23 l) |
| DEF Tank | 6.9 gal (US) (26 l) |
| Differential – Final Drives – Front | 15.1 gal (US) (57 l) |
| Differential – Final Drives – Rear | 15.1 gal (US) (57 l) |
| Fuel Tank | 80.1 gal (US) (303 l) |
| Hydraulic Tank | 30.1 gal (US) (114 l) |
| Transmission | 15.5 gal (US) (58.5 l) |
| Implement System – Maximum Operating Pressure | 4496 psi (31000 kPa) |
| Implement System – Maximum Pump Output at 2,250 rpm | 99 gal/min (373 l/min) |
| Note | All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires. |
| Centerline of Rear Axle to Edge of Counterweight | 8.1 ft (2458 mm) |
| Centerline of Rear Axle to Hitch | 5.1 ft (1775 mm) |
| Ground Clearance | 1.4 ft (424 mm) |
| Height – Top of Exhaust Pipe | 11.8 ft (3531 mm) |
| Height – Top of Hood | 9.5 ft (2850 mm) |
| Height – Top of ROPS | 11.1 ft (3593 mm) |
| Hinge Pin Height at Carry | 2.6 ft (782 mm) |
| Hinge Pin Height at Maximum Lift | 15.9 ft (4804 mm) |
| Lift Arm Clearance at Maximum Lift | 13.8 ft (4183 mm) |
| Overall Length – Without Bucket | 26.6 ft (8069 mm) |
| Tread Width | 7.3 ft (2230 mm) |
| Wheel Base | 11.8 ft (3550 mm) |
| Centerline of Rear Axle to Hitch | 5.1 ft (1775 mm) |
| Ground Clearance | 420 mm (1.4 ft) |
| Height – Top of Exhaust Pipe | 3527 mm (11.7 ft) |
| Height – Top of Hood | 2846 mm (9.4 ft) |
| Height – Top of ROPS | 3589 mm (11 ft) |
| Hinge Pin Height at Carry | 2.2 ft (682 mm) |
| Hinge Pin Height at Maximum Lift | 4464 mm (14.7 ft) |
| Lift Arm Clearance at Maximum Lift | 3843 mm (12.7 ft) |
| Overall Length – Without Bucket | 7731 mm (25.5 ft) |
| Tread Width | 7.3 ft (2230 mm) |
| Wheel Base | 3550 mm (11.8 ft) |
| Displacement | 9.3 L |
| Rack Back – Maximum Lift | 56 degrees |
| Width over Tires (Loaded) | 9.11 ft (3012 mm) |
| Rack Back – Carry Height | 49 degrees |
| With Cooling Fan Speed at Maximum Value – Note | Distance of 15 m (49.2 ft), moving forward in second gear ratio. |
| Centerline of Rear Axle to Edge of Counterweight | 8 ft (2458 mm) |
| Gross Torque @ 1,200 rpm SAE J1995:2014 | 1388 lb/ft (1882 N·m) |
| Rack Back – Maximum Lift | 71 degrees |
| Note (3) | Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester)* 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or Caterpillar Machine Fluids Recommendations (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. |
| Width over Tires (Loaded) | 9.11 ft (3012 mm) |
| Rack Back at Ground | 39 degrees |
| Engine Torque @ 1,200 rpm ISO 14396:2002 | 1375 lb/ft (1864 N·m) |
| Rack Back at Ground | 37 degrees |
| Hydraulic Cycle Time – Total | 10.7 seconds |
| Rack Back – Carry Height | 49 degrees |
