| Engine Model |
Cat® C15 |
| Engine Power – Tier 3 Engine – ISO 14396:2002 |
401 HP (299 kW) |
| Nominal Payload Capacity |
44092 lb (20000 kg) |
| Engine Power – VR Engine – ISO 14396:2002 |
401 HP (299 kW) |
| Bore |
5.4 in (137.2 mm) |
| Stroke |
6.8 in (171.5 mm) |
| Engine Crankcase |
9 gal (US) (34 l) |
| Outside Clearance Radius** |
296.7 in (7536 mm) |
| Operating Mass* |
128448 lb (58263 kg) |
| Gross Machine Mass |
180779 lb (82000 kg) |
| Displacement |
927.6 in³ (15.2 l) |
| Bucket Capacities |
8.9-11.6 m³ (11.6-15.2 yd³) |
| Transmission |
16.4 gal (US) (62 l) |
| Inner Clearance Radius** |
127.8 in (3247 mm) |
| Note (1) |
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
| Operating Mass* – Front Axle |
54558 lb (24747 kg) |
| Dump Bucket – 1 – Standard Bucket |
11.6 yd³ (8.9 m³) |
| Hydraulic Tank |
37 gal (US) (140 l) |
| Note (2) |
All rating conditions are based on ISO/TR 14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (7.05-7.09 lb/gal @ 59° F) and fuel inlet temperature 40° C (104° F). |
| Axle Oscillation |
8 ° (8 °) |
| Operating Mass* – Rear Axle |
73853 lb (33499 kg) |
| Dump Bucket – 2 |
12.4 yd³ (9.5 m³) |
| Articulation Angle |
42.5 ° (42.5 °) |
| Dump Bucket – 3 |
13.7 yd³ (10.5 m³) |
| Cooling System |
19.8 gal (US) (75 l) |
| Note (3) |
No engine derating required up to 3050 m (10,006 ft) altitude for equivalent Tier 3 engines, and 3506 m (11,502 ft) for VR engines. |
| Operating Mass + Rated Payload* |
172540 lb (78263 kg) |
| Front Differential and Final Drives |
31.4 gal (US) (119 l) |
| Operating Mass + Rated Payload* – Front Axle |
125187 lb (56784 kg) |
| Note (4) |
Optional Ventilation Reduction package available. |
| Note |
**Clearance dimensions are for reference only. |
| Static Tipping Load – Straight Ahead – Lift Arms Horizontal |
104199 lb (47264 kg) |
| Light Material Bucket |
15.2 yd³ (11.6 m³) |
| Static Tipping Full Turn Ahead Lift Arms Horizontal |
88191 lb (40003 kg) |
| Note (5) |
Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. |
| Breakout Force – SAE |
61773 lb (28020 kg) |
| Operating Mass + Rated Payload* – Rear Axle |
47316 lb (21462 kg) |
| Front Differential and Final Drives – With Axle Oil Cooling System |
42 gal (US) (159 l) |
| Note |
*Calculated weight. |
| Rear Differential and Final Drives – With Axle Oil Cooling System |
44.1 gal (US) (167 l) |
| Fuel Tank |
406.5 gal (US) (1539 l) |
| Raise |
8.8 s (8.8 s) |
| Dump |
1.85 s (1.85 s) |
| Lower, Empty, Float Down |
3.54 s (3.54 s) |
| Total Cycle Time |
14.2 s (14.2 s) |
| Forward – 1 |
3 mile/h (4.9 km/h) |
| Forward – 2 |
5.7 mile/h (9.1 km/h) |
| Forward – 3 |
10.2 mile/h (16.4 km/h) |
| Forward – 4 |
17.5 mile/h (28.2 km/h) |
| Reverse – 1 |
4.1 mile/h (6.6 km/h) |
| Reverse – 2 |
7.1 mile/h (11.5 km/h) |
| Reverse – 3 |
12.7 mile/h (20.5 km/h) |
| Reverse – 4 |
19.4 mile/h (31.3 km/h) |
| Tire Size |
35/65 R33 |
| Standards |
Rollover Protective Structure (ROPS)/Falling Object Protective Structure (FOPS) Certified Cab |
| Rear Differential and Final Drives |
33.5 gal (US) (127 l) |
