Specifications
| Bit Load | Up to 16 964 kg (37,400 lb) |
| Hole Diameter | 127-200 mm (5.0-7.87 in) |
| Engine | Cat® C18 @ 1,800 rpm |
| U.S. EPA Tier 2 Equivalent – Engine | C18 @ 1,800 rpm |
| U.S. EPA Tier 2 Equivalent – Emissions | U.S. EPA Tier 2 equivalent |
| U.S. EPA Tier 4 Final – Engine | C18 @ 1,800 rpm |
| U.S. EPA Tier 4 Final – Emissions | U.S. EPA Tier 4 Final |
| Compressor – Rotary Drilling | 32.6 m³/min (1,150 ft³/min) @ 8.6 bar (125 psi) |
| Angle Drilling Available | 30° to –15° in 5° increments |
| DTH Drilling | Includes tool lubrication system |
| Rotary Drilling | Optional tool lubrication system |
| Note | With the compressorÂ’s electronic controls plus variable volume control, the operator can adjust air output to reach optimal match of tool, flushing air and ground conditions. Both high and low pressure compressors contain this feature. |
| Choice (1) | Low pressure 8.6 bar (125 psi) |
| Choice (2) | High pressure 24.1 bar (350 psi) |
| Components (1) | Coolers with easy cleaning access |
| Components (2) | All cooler core sections are replaceable |
| Components (3) | Functional in ambient temperature of up to 52° C (125° F) |
| Components (4) | Automatic variable speed fan control |
| Climate Level 1 Standard Fluids and Lubricants (1) | Rated down to –1° C (30° F) |
| Climate Level 1 Standard Fluids and Lubricants (2) | Withstands high heat up to 52° C (125° F) |
| Features (1) | Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life |
| Features (2) | Slip resistant surfaces |
| Features (3) | Fuel tank capacity 833 L (220 gal) |
| Components (1) | Three leveling jacks provide leveling on a 7° bench (any orientation) |
| Components (2) | Heavy duty tow hooks (non-drill end) |
| Components (3) | Four (4) lift lugs, for use with cables or chains |
| Choice (1) | Fixed access steps to the cab area |
| Choice (2) | Small platform to the cab includes fixed access steps |
| Components (1) | Drill pipe thread greaser with remote fill tank that also accommodates disposable grease bucket |
| Model | Cat 336 Excavator type |
| Carrier Rollers | Three (3) |
| Triple Grousers (1) | 600 mm (23.6 in); 0.89 bar (12.6 psi) ground pressure |
| Components (1) | Two (2) main pumps – 85 cc (piston with proportional electronic controls) |
| Components (2) | One (1) auxiliary circuit pump – 45 cc (piston, load sensing) |
| Components (3) | One (1) fan pump – 45 cc (piston with proportional electronic controls) |
| Components (4) | One (1) charge pump – 73.8 cc (gear, fixed displacement) |
| U.S. EPA Tier 2 Equivalent – Power Rating (ISO 14396) | 587 HP (438 kW) |
| Choice (3) | Platform access to the cab with full length service access walkway includes fixed access steps and self-closing gates |
| Pull-DownCapacity | Up to 15 876 kg (Up to 35,000 lb) |
| Hoist | Up to 11 907 kg (Up to 26,250 lb) |
| Hoist Capacity | Up to 11 907 kg (Up to 26,250 lb) |
| Hole Depth Range – Multi-Pass Depth | Down to 47.58 m (Down to 156 ft) |
| Components (5) | Scheduled Oil Sampling (S·O·SSM) ports |
| Feature (2) | Ether starting aid |
| Lower rollers | Eight (8) |
| U.S. EPA Tier 4 Final – Power Rating (ISO 14396) | 589 HP (439 kW) |
| Travel Speed – High | 2 mile/h (3.3 km/h) |
| 9.14 m (30 ft) pipes – Accepts quantity of four (4) – Option 2 | 4.5 in (114 mm) |
| 9.14 m (30 ft) pipes – Accepts quantity of four (4) – Option 1 | 4 in (101 mm) |
| 9.14 m (30 ft) pipes – Accepts quantity of four (4) – Option 5 | 6 in (152 mm) |
| Height mast up | 54.3 ft (16.54 m) |
| 9.14 m (30 ft) pipes – Accepts quantity of four (4) – Option 4 | 5.5 in (140 mm) |
| Travel Speed – Low | 1.3 mile/h (2.1 km/h) |
| Climate Level 2 Arctic Fluids and Lubricants, Engine Block and Manifold Heater 120V or 240V | Rated down to –18° C (0° F) |
| Rotary Drilling – 1150 cfm/125 psi | 32.6 m³/min (1,150 ft³/min) @ 8.6 bar (125 psi) |
| 9.14 m (30 ft) pipes – Accepts quantity of four (4) – Option 3 | 5 in (127 mm) |
| High Volume Water Injection – Maximum – Tank Below Deck – Capacity | 200 gal (US) (757 l) |
| Components (1) | Track chain guards and guides |
| Feature (3) | Tier 4 Final package complete with DEF/Engine Shutdown Control Package |
| Compressor – DTH Drilling | 29.7 m³/min (1,050 ft³/min) @ 24.1 bar (350 psi) |
| Water Injection – Tank Mounted Below Front Deck – Components | Water flow meter, volume control, tank fill level indicator |
| Note | *For width with platform access to cab or service platform walkway contact the factory. |
| Bit Load (single-Pass) | 37400 lb (16964 kg) |
| Width non-cab end | 11.7 ft (3.57 m) |
| Components (7) | Drill tool lubricator (optional) |
| High Volume Water Injection – Maximum – Tank Above Deck – Capacity | 200 gal (US) (757 l) |
| Single-Pass Depth | 36 ft (11 m) |
| Body Length | 31 ft (9.44 m) |
| DTH Drilling – 1050 cfm/350 psi | 29.7 m³/min (1,050 ft³/min) @ 24.1 bar (350 psi) with 113.5 L (30 gal) tool oiler |
| Feature (1) | Dual starter motors |
| Mast only length | 52.1 ft (15.89 m) |
| Components (7) | Drill tool lubricator is included with selection of DTH Compressor |
| Hoist Speed | 4.3 ft/s (1.32 m/s) |
| Components (8) | Top sub |
| Hole Diameter Range | 127-200 mm (5.0-7.87 in) |
| Height mast down | 11.75 ft (3.58 m) |
| Drawbar Pull | TBD |
| Length mast down | 57.5 ft (17.54 m) |
| Width cab end* | 13.7 ft (4.18 m) |
| Hole Depth Range – Single-Pass Depth | 36 ft (11 m) |
| Multi-Pass Depth | Down to 47.58 m (Down to 156 ft) |
| Pulldown – Rated Single Cylinder Pull-Down/Hoist System | Up to 15 876 kg (Up to 35,000 lb) |
| Features (1) | Pipe carousel: – Accepts quantity of four (4) 9.14 m (30 ft) pipes |
| Features (2) | Standard angle drilling package (0 to 30 degrees, in 5-degree increments) |
| Features (3) | Optional negative angle drilling package (0 to –15 degrees, in 5-degree increments) for a total range of (30 to –15 degrees) |
| Features (4) | Hydraulically actuated, self-indexing pipe carousel accepts pipe diameters up to 152 mm (6.0 in) |
| Features (5) | Drills strings configured for bit changes above deck |
| Features (6) | Single cylinder pulldown/hoist system |
| Features (7) | Sliding deck wrench assembly |
| Features (8) | Configured with roller deck bushing (for low pressure/tricone drilling) |
| Features (9) | Two-piece deck bushing (for high pressure DTH drilling) |
| Features (10) | Overhead winch with cable and hook plus remote control; variable speed drive with a 1361 kg (3,000 lb) rating |
| Features (11) | Variable grip hydraulic break out wrench grip range 101-152 mm (4.0-6.0 in) |
| Features (12) | Closed circuit camera mounted in mast to view pipe carousel/top drive operation |
| Features (13) | Pipe positioner for angle drilling, multi-pass pipe handling |
| Features (14) | Manual pipe catcher – One (1) wire rope, pipe catcher, pipe positioner, optional manual bit basket |
| Components (1) | One-piece roller deck bushing |
| Components (2) | Pipe positioner clamps |
| Components (3) | Deck wrench |
| Components (4) | Bit sub |
| Components (5) | Top sub |
| Components (6) | Pipe wiper seal |
| Components (1) | Two-piece bushing |
| Components (2) | Pipe positioner clamps |
| Components (3) | Deck wrench |
| Components (4) | Shock sub |
| Components (5) | Cross over subs |
| Components (6) | Pipe wiper seal |
| Torque – Single Motor | 6166 lb/ft (8360 N·m) |
| Rotation Speed | 0-150 rpm |
| Components (1) | Output shaft with box-end API-IF (NC46) 101 mm (4 in) thread |
| Components (2) | Rotary torque control |
| Components (3) | Virtual rotary head travel interlocks |
| Cab Design | – FOPS cab has 1.9 m² (20.5 ft²) floor space – Rubber shock-mounts absorb mechanical vibration – Operator station design integrates an ergonomic seat, joystick controls with full instrumentation, and dual 254 mm (10 in) high-definition color screens and 12 volt power port – Additional display screen for cc cameras; color, high-definition 254 mm (10 in) – Power convertor 24V to 12V – Radio-ready for communication and entertainment stereo – Two swing out doors and Cat keyed locks – Literature holder – Storage area suitable for lunchbox |
| Cab Packages | – Standard configuration includes a fabric seat, removable floor mat, single pane window glass and driller window guard – Premium configuration includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass and driller window guard |
| Seating | – Seat swivels, locks and has two point retractable/76 mm (3 in) seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in) |
| Windows | – Large windows front, rear and right cab side; full length drill window with guard – Window shades (option) – Windshield wiper with a common washer tank – Manometer Pressure Gauge (option) |
| Lighting | – LED interior lights, backlit joysticks and keypads – Flood lights for the drill perimeter; area spotlights – Mast beacon and tram flashing strobe light (option) |
| HVAC | – Floor heating vent – Filter access from deck, 500 hour service interval – Defogging HVAC vents on main window |
| Cameras | – Three (3) CC cameras (front and left side) providing 360° vision coverage from operators seat; camera on the mast to view pipe carousel/top drive operation |
| Components (1) | Electric controls for drilling, tramming, leveling plus auxiliary functions |
| Components (2) | Rotary torque control |
| Components (3) | Virtual rotary head travel stops |
| Components (4) | Pipe positioner engaged/disengaged indicator |
| Components (5) | Drill depth meter |
| Components (6) | Drill performance and display system |
| Components (7) | Delayed engine shut down |
| Components (8) | Filter indicators for hydraulic, fuel, compressor and engine |
| Components (9) | Jack pressure sensors |
| Components (10) | Data logging of machine health with warnings and fault code records with export capability |
| Components (11) | Dust suppression control |
| Components (12) | Mast lock indicator |
| Components (13) | ECM proportional fan speed control system |
| Components (14) | Tram interlock, machine stability limits |
| Components (15) | Tram interlock, pipe in hole |
| Components (16) | Tram interlock, mast up and locked or down and parked |
| Components (17) | Tram interlock, jacks retracted |
| Components (18) | Tram interlock, winch parked |
| Components (19) | Cab environment controls (AC, heat, fan speeds) |
| Components (20) | Pre wired for Terrain and Autonomous Operation |
| Type (1) | Autonomous ready |
| Components (1) | Drill depth meter |
| Components (2) | Drill Assist (auto level, auto retract jacks, auto mast raise and lower, optional, single-pass auto drill) |
| Components (3) | Cat Terrain ready |
| Components (4) | Product Link Elite™ |
| Water Injection – Tank Mounted Below Front Deck | 200 gal (US) (757 l) |
| High Volume Water Injection – Maximum – Tanks Total Capacity | 400 gal (US) (1514 l) |
| Water Injection plus Dust Collector (1) | 76.5 m³/min (2,700 ft³/min) dust collector; includes standard water injection |
| Water Injection plus Dust Collector (2) | Self-cleaning filters, dust chute clean-out door |
| Choices (1) | Static dust curtains, four sides boxed enclosed |
| Choices (2) | Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dry dust collector) |
| Choices (3) | Tram off spray system (option) |
| Feature (1) | Approach angle of 15-degrees facilitates loading and unloading on a lowboy |
| Components (1) | Seven (7) emergency stop buttons |
| Components (2) | Hinged window guard over the full length of the front drill window |
| Components (3) | Conditional safety interlocks |
| Components (4) | Self-closing gates |
| Components (5) | Electric horn activated by push button in the cab |
| Components (6) | Automatic, audible tram alarm |
| Components (7) | Battery disconnect and starter switches can be locked out |
| Components (8) | Air hose retention devices |
| Components (9) | Slip resistant platform surfaces |
| Components (10) | Machine lifting provisions |
| Components (11) | FOPS Certified Operator Cab |
| Package (1) | Basic – Centralized manual lubrication for all pivot points, gravity fill for fuel and water |
| Package (2) | Standard – Automated lubrication system, fast fill for fuel and water (option) |
| Package (3) | Premium – Automated lubrication system, fast fill fuel and water, service center for lubricant drain and fill plus blowdown hose (option) |
| Working Weight Range | 40 728 – 42 752 kg (89,789 – 94,253 lb) |
