| Engine Model |
Cat C9.3 |
| Rated Payload |
26.5 ton (US) (24 t) |
| Heaped (SAE 2:1) |
19.6 yd³ (15 m³) |
| Bore |
4.5 in (115 mm) |
| Stroke |
45.2 in (1149 mm) |
| Displacement |
567.5 in³ (9.3 l) |
| Forward – 1 |
5 mT/hr (8.1 km/h) |
| Forward – 2 |
9.4 mT/hr (15.2 km/h) |
| Forward – 3 |
14.4 mT/hr (23.2 km/h) |
| Forward – 4 |
22.1 mT/hr (35.5 km/h) |
| Forward – 5 |
30.7 mT/hr (49.4 km/h) |
| Forward – 6 |
36.3 mT/hr (58.4 km/h) |
| Reverse – 1 |
5.5 mT/hr (8.9 km/h) |
| Struck |
14.4 yd³ (11 m³) |
| Fuel Tank |
91 gal (US) (412 l) |
| Cooling System |
18 gal (US) (83 l) |
| Hydraulic System |
29.1 gal (US) (110 l) |
| Engine Crankcase |
8 gal (US) (38 l) |
| Transmission |
10 gal (US) (47 l) |
| Final Drives/Differential |
33 gal (US) (125 l) |
| Output Transfer Gear Box |
5 gal (US) (24 l) |
| Interior Cab |
69 dB(A) (69 dB(A)) |
| Raise Time |
10 s (10 s) |
| Lower Time |
8 s (8 s) |
| Brakes |
ISO 3450 2011 |
| Cab – FOPS |
ISO 3449 Level II 2008 |
| Cab – ROPS |
ISO 3471 2008 |
| Lock to Lock |
4.75 seconds @ 60 rpm |
| Steering/Hoist Hydraulic System |
24 gal (US) (110 l) |
| Note (4) |
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications. |
| Note (2) |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
| Note (1) |
The declared dynamic operator sound pressure level is 69±2 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. |
| Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
| Note (3) |
Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions. |
| Emissions |
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards. |
| Note (1) |
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
| Wheel Loaders: 972M/972M XE – Passes |
3-4 |
| Hydraulic Excavators: 349F/349F XE – Passes |
4-5 |
| Turning Dimensions – Inside Radius |
153 in (3879 mm) |
| Turning Dimensions – Aisle Width |
210 in (5332 mm) |
| Turning Dimensions – SAE Turning Radius |
294 in (7470 mm) |
| Turning Dimensions – Clearance Radius |
318 in (8075 mm) |
| Turning Dimensions – Steer Angle – Left/Right |
45° |
| Note |
Dimensions are for machines equipped with 23.5R25 tires. |
| Wheel Loader: 950M – Passes |
5 |
| Wheel Loader: 962M – Passes |
4-5 |
| Wheel Loaders: 966M/966M XE – Passes |
4 |
| Hydraulic Excavators: 336F/336F XE – Passes |
5-6 |
| Type |
High strength Brinell HB450 wear resistant steel |
| Front Plate |
0.28 in (7 mm) |
| DEF Tank |
4 gal (US) (20 l) |
| Base Plate |
0.51 in (13 mm) |
| Peak Engine Torque Gross (SAE J1995) |
1275 ft·lbf (1729 N·m) |
| Gross Power – SAE J1995 |
342 HP (255 kW) |
| Net Power – ISO 14396 |
338 HP (252 kW) |
| Engine Model – U.S. EPA Tier 4 Final/EU Stage IV |
Cat® C9.3 |
| No Engine De-rating Below |
3000 ft (914 m) |
| Peak Engine Torque Net (SAE J1349) |
1263 ft·lbf (1712 N·m) |
| Net Power – SAE J1349 |
334 HP (249 kW) |
| Peak Engine Torque Speed |
1200 r/min (1200 r/min) |
| Total – Loaded |
103886 lb (47122 kg) |
| Rear Axle – Rated Load |
23699 lb (10750 kg) |
| Total – Empty |
50975 lb (23122 kg) |
| Total – Rated Load |
52910 lb (24000 kg) |
| Center Axle – Loaded |
33944 lb (15397 kg) |
| Front Axle – Rated Load |
5511 lb (2500 kg) |
| Center Axle – Rated Load |
23699 lb (10750 kg) |
| Center Axle – Empty |
10242 lb (4646 kg) |
| Rear Axle – Loaded |
33457 lb (15176 kg) |
| Front Axle – Loaded |
36484 lb (16549 kg) |
| Rear Axle – Empty |
9757 lb (4426 kg) |
| Front Axle – Empty |
30974 lb (14050 kg) |
| Side Plates |
0.43 in (11 mm) |
| Final Drive – Each |
1.6 gal (US) (7.5 l) |
| Steering |
ISO 5010 2007 |
| Tailgate Heaped SAE 2:1 |
20.4 yd³ (15.6 m³) |
| Tailgate Struck |
14.5 yd³ (11.1 m³) |
