| Engine Model |
Cat® 3306B DITA |
| Engine Power – ISO 14396:2002 |
157 HP (117 kW) |
| Nominal Payload Capacity |
14991 lb (6800 kg) |
| Bore |
4.75 in (120.7 mm) |
| Stroke |
6 in (152.4 mm) |
| Displacement |
640.75 in³ (10.5 l) |
| Note (1) |
Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard. |
| Note (2) |
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (7.05-7.09 lb/gal @ 59° F) and fuel inlet temperature 40° C (104° F). |
| Note (3) |
Engine derate will commence at an altitude of 4500 m (14,763.7 ft). |
| Gross Machine Mass |
65482 lb (29702 kg) |
| Static Tipping Load – Straight Ahead – Lift Arms Horizontal |
45360 lb (20575 kg) |
| Static Tipping Load – Full Turn – Lift Arms Horizontal |
39397 lb (17870 kg) |
| Breakout Force – SAE |
26504 lb (12020 kg) |
| Operating Mass* |
45691 lb (20725 kg) |
| Operating Mass* – Front Axle |
16810 lb (7625 kg) |
| Operating Mass* – Rear Axle |
28881 lb (13100 kg) |
| Operating Mass + Rated Payload* |
60682 lb (27525 kg) |
| Operating Mass + Rated Payload* – Front Axle |
41105 lb (18645 kg) |
| Operating Mass + Rated Payload* – Rear Axle |
19577 lb (8880 kg) |
| Note |
*Calculated weights. |
| Forward – 1 |
2.8 mile/h (4.5 km/h) |
| Forward – 2 |
4.8 mile/h (7.8 km/h) |
| Forward – 3 |
9.3 mile/h (15 km/h) |
| Forward – 4 |
16.3 mile/h (26.3 km/h) |
| Reverse – 1 |
2.8 mile/h (4.5 km/h) |
| Reverse – 2 |
4.8 mile/h (7.8 km/h) |
| Reverse – 3 |
9.2 mile/h (14.8 km/h) |
| Reverse – 4 |
14.3 mile/h (23 km/h) |
| Raise |
5 s (5 s) |
| Dump |
2 s (2 s) |
| Lower, Empty, Float Down |
2.3 s (2.3 s) |
| Total Cycle Time |
9.3 s (9.3 s) |
| Dump Bucket – 1 |
3.2 yd³ (2.5 m³) |
| Dump Bucket – 2 |
3.7 yd³ (2.8 m³) |
| Dump Bucket – 3 – Standard Bucket |
4.1 yd³ (3.1 m³) |
| Dump Bucket – 4 |
4.4 yd³ (3.4 m³) |
| Ejector Bucket |
3.1 yd³ (2.4 m³) |
| Outside Clearance Radius |
225.1 in (5717 mm) |
| Inner Clearance Radius |
111.2 in (2825 mm) |
| Axle Oscillation |
10° |
| Articulation Angle |
42.5° |
| Tire Size |
17.5 × R25 |
| Engine Crankcase – With Filter |
6.6 gal (US) (25 l) |
| Transmission |
11.9 gal (US) (45 l) |
| Hydraulic Tank |
23.2 gal (US) (88 l) |
| Cooling System |
17.7 gal (US) (67 l) |
| Front Differential and Final Drives |
10 gal (US) (38 l) |
| Rear Differential and Final Drives |
11.1 gal (US) (42 l) |
| Fuel Tank |
77.9 gal (US) (295 l) |
| Standards |
ROPS/FOPS Certified Cab |
