| Base Power (1st Gear) – Net |
238 HP (178 kW) |
| Operating Weight – Typically Equipped |
57250 lb (25968 kg) |
| Blade Width |
14 ft (4.2 m) |
| Engine Model |
Cat C13 |
| Bore |
5.1 in (130 mm) |
| Stroke |
6.2 in (157 mm) |
| Speed at Rated Power |
1,850 rpm |
| Arc Radius |
16.3 in (413 mm) |
| Throat Clearance |
4.6 in (117 mm) |
| Maximum Depth of Cut |
23.3 in (593 mm) |
| Torque Rise |
41% |
| Maximum Shoulder Reach Outside of Tires – Left |
73.6 in (1870 mm) |
| Circle Centershift – Left |
25.6 in (650 mm) |
| Maximum Lift Above Ground |
16.5 in (419 mm) |
| Circle Centershift – Right |
20.5 in (520 mm) |
| Blade Tip Range – Backward |
5° |
| Maximum Shoulder Reach Outside of Tires – Right |
78.9 in (2004 mm) |
| Moldboard Sideshift – Right |
31.1 in (790 mm) |
| Moldboard Sideshift – Left |
29.1 in (740 mm) |
| Blade Tip Range – Forward |
40° |
| Blade Width – Without End Bits |
164 in (4166 mm) |
| Note (3) |
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
| Gross Vehicle Weight – Base* – Total |
50980 lb (23124 kg) |
| Gross Vehicle Weight – Base* – Front Axle |
13994 lb (6344 kg) |
| Gross Vehicle Weight – Typically Equipped – Total |
57250 lb (25968 kg) |
| Gross Vehicle Weight – Typically Equipped – Rear Axle |
42005 lb (19053 kg) |
| Gross Vehicle Weight – Typically Equipped – Front Axle |
15245 lb (6915 kg) |
| Gross Vehicle Weight – Base* – Rear Axle |
36994 lb (16780 kg) |
| Note (5) |
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. |
| Note |
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. |
| Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). |
| Blade Height – Without Cutting Edge |
23 in (585 mm) |
| Blade Height – With Cutting Edge |
24.9 in (631 mm) |
| Maximum Altitude – Full Power |
13900 ft (4237 m) |
| Blade Width – With End Bits |
169 in (4290 mm) |
| Maximum Torque – VHP Plus |
1137 lb/ft (1542 N·m) |
| Emissions |
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent |
| Maximum Altitude – Full Power (Tier 3) |
14349 ft (4374 m) |
| Maximum Altitude – Full Power (Tier 2) |
12049 ft (3672 m) |
| Note (1) |
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. |
| Standard – Fan Speed – Minimum |
550 rpm |
| Note (4) |
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp) |
| Circle – Outer Diameter |
71.7 in (1822 mm) |
| Front Axle – Wheel Lean – Left/Right |
17.1° |
| Front Axle – Total Oscillation per Side |
32° |
| Transmission and Differential |
23.5 gal (US) (89 l) |
| Diesel Exhaust Fluid Tank (Tier 4 Only) |
5.8 gal (US) (22 l) |
| Hydraulic System |
33 gal (US) (125 l) |
| Circle Drive |
1.8 gal (US) (7 l) |
| Cooling System |
15.9 gal (US) (60 l) |
| Fuel Tank |
109.9 gal (US) (416 l) |
| Note (2) |
Optimized VHP Plus is standard for the 14M3. |
| Standard Capability |
122 °F (50 °C) |
| Standard – Fan Speed – Maximum |
1,600 rpm |
| Displacement |
763 in³ (12.5 l) |
| Number of Cylinders |
6 |
