Specifications

Net Power Range (Tier 4)	200 HP (149 kW)
Operating Weight – Typically Equipped	43950 lb (19935 kg)
Blade Width	12 ft (3.7 m)
Engine Model	Cat® C9.3
Gross Vehicle Weight – Maximum – Front Axle	17075 lb (7745 kg)
Gross Vehicle Weight – Maximum – Rear Axle	38069 lb (17268 kg)
Operating Weight – Typically Equipped – Front Axle	12549 lb (5692 kg)
Operating Weight – Typically Equipped – Rear Axle	31401 lb (14243 kg)
Gross Vehicle Weight – Base – Front Axle	9601 lb (4355 kg)
Gross Vehicle Weight – Base – Rear Axle	28590 lb (12968 kg)
Gross Vehicle Weight – Maximum – Total	55144 lb (25013 kg)
Bore	4.5 in (115 mm)
Stroke	5.9 in (149 mm)
Top Speed – Forward	29 mile/h (46.6 km/h)
Top Speed – Reverse	23 mile/h (36.8 km/h)
Turning Radius – Outside Front Tires	25.59 ft (7.8 m)
Steering Range – Left/Right	50°
Articulation Angle – Left/Right	20°
Fuel Capacity	104 gal (US) (394 l)
Speed at Rated Power	2,000 rpm
Forward/Reverse Gears	8 Forward/6 Reverse
Transmission	APECS, Direct Drive, Powershift
Brakes – Service	Multiple Oil Disc
Brakes – Service – Surface Area	3565 in² (23000 cm²)
Circuit Type	Parallel
Pump Type	Variable Piston
Pump Output	55.7 gal/min (210 l/min)
Maximum System Pressure	3500 psi (24150 kPa)
Reservoir Tank Capacity	16.9 gal (US) (64 l)
Standby Pressure	885 psi (6100 kPa)
Drawbar – Width	3 in (76.2 mm)
Forward – 1st	2.5 mile/h (4.1 km/h)
Forward – 2nd	3.4 mile/h (5.5 km/h)
Forward – 3rd	5 mile/h (8 km/h)
Forward – 4th	6.9 mile/h (11 km/h)
Forward – 5th	10.6 mile/h (17.1 km/h)
Forward – 6th	14.5 mile/h (23.3 km/h)
Forward – 7th	19.9 mile/h (32 km/h)
Forward – 8th	29 mile/h (46.6 km/h)
Reverse – 1st	2 mile/h (3.2 km/h)
Reverse – 2nd	3.7 mile/h (6 km/h)
Reverse – 3rd	5.4 mile/h (8.7 km/h)
Reverse – 4th	8.4 mile/h (13.5 km/h)
Reverse – 5th	15.7 mile/h (25.3 km/h)
Reverse – 6th	23 mile/h (36.8 km/h)
Brakes – Parking	Multiple Oil Disc
Brakes – Secondary	Dual Circuit
Circle – Diameter	60.2 in (1530 mm)
Circle – Blade Beam Thickness	1.6 in (40 mm)
Drawbar – Height	6 in (152 mm)
Moldboard – Height	24 in (610 mm)
Moldboard – Thickness	0.87 in (22 mm)
Arc Radius	16.3 in (413 mm)
Throat Clearance	6.5 in (166 mm)
Cutting Edge Width	6 in (152 mm)
Cutting Edge Thickness	0.6 in (16 mm)
End Bit – Width	6 in (152 mm)
End Bit – Thickness	0.6 in (16 mm)
Blade Pull – Base GVW	25732 lb (11672 kg)
Blade Pull – Maximum GVW	34262 lb (15541 kg)
Blade Down Pressure – Base GVW	16480 lb (7475 kg)
Circle Centershift – Right	28.7 in (728 mm)
Blade Down Pressure – Maximum GVW	29308 lb (13294 kg)
Circle Centershift – Left	27.4 in (695 mm)
Moldboard Sideshift – Right	26 in (660 mm)
Moldboard Sideshift – Left	20.1 in (510 mm)
Maximum Blade Position Angle	90°
Blade Tip Range – Forward	40°
Blade Tip Range – Backward	5°
Maximum Shoulder Reach Outside of Tires – Right	77.9 in (1978 mm)
Maximum Shoulder Reach Outside of Tires – Left	70.5 in (1790 mm)
Maximum Lift Above Ground	18.9 in (480 mm)
Maximum Depth of Cut	28.1 in (715 mm)
Cooling System	15 gal (US) (57 l)
Hydraulic System – Total	26.4 gal (US) (100 l)
Hydraulic System – Tank	16.9 gal (US) (64 l)
ROPS/FOPS	ISO 3471/ISO 3449
Mid, V-Type – Scarifier Shank Holders	11
Front, V-Type, 5 or 11 Tooth – Scarifying Depth, Maximum	18.4 in (467 mm)
Sound	ISO 6394; ISO 6395
Rear – Scarifying Depth, Maximum	16.8 in (426 mm)
Mid, V-Type – Working Width	46.6 in (1184 mm)
Front, V-Type – Working Width	47.4 in (1205 mm)
Front, V-Type, 5 or 11 Tooth – Working Width	40.6 in (1031 mm)
Mid, V-Type – Scarifying Depth, Maximum	11.5 in (292 mm)
Mid, V-Type – Scarifier Shank Holder Spacing	4.6 in (116 mm)
Ripper Shank Holder Spacing	21 in (533 mm)
Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holder Spacing	4.6 in (116 mm)
Gross Vehicle Weight – Base – Total	38191 lb (17323 kg)
Brakes	ISO 3450
Moldboard – Blade Width	12 ft (3.7 m)
Operating Weight – Typically Equipped – Total	43950 lb (19935 kg)
Steering	ISO 5010
Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holders	11-May
Ripping Depth – Maximum	16.8 in (426 mm)
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
VHP Plus – Gear – Net Power – Reverse 2nd	210 HP (156 kW)
Front Frame Structure – Width	12 in (305 mm)
VHP Plus – Gear – Net Power – Forward 3rd	220 HP (164 kW)
Torque Rise	39%
VHP Plus – Gear – Net Power – Forward 4th	231 HP (172 kW)
VHP Plus – Gear – Net Power – Reverse 3rd-6th	220 HP (164 kW)
Standard Capability	109 °F (43 °C)
Transmission – Differential – Final Drives	18.5 gal (US) (70 l)
Diesel Exhaust Fluid	5.8 gal (US) (22 l)
VHP Plus Range – Net – Metric	149-188 kW (202-255 hp)
Base Power (1st Gear) – Net – Metric	202 HP (149 kW)
High Ambient – Fan Speed – Standard	1,400 rpm
VHP Plus – Gear – Net Power – Forward 7th	247 HP (184 kW)
VHP Plus – Gear – Net Power – Forward 5th	236 HP (176 kW)
Front Frame Structure – Height	12.6 in (321 mm)
VHP Plus – Gear – Net Power – Forward 6th	241 HP (180 kW)
VHP Plus – Gear – Net Power – Reverse 1st	200 HP (149 kW)
VHP Plus – Gear – Net Power – Forward 1st	200 HP (149 kW)
Maximum Torque – VHP Plus	920 lb/ft (1247 N·m)
VHP Plus – Gear – Net Power – Forward 8th	252 HP (188 kW)
Circle – Height	5.4 in (138 mm)
VHP Plus Range – Net	149-188 kW (200-252 hp)
VHP Plus – Gear – Net Power – Forward 2nd	210 HP (156 kW)
Emissions	U.S. EPA Tier 4 Final/EU Stage V
Ripper Shank Holders	5
Displacement	567.5 in³ (9.3 l)
Drawbar – Thickness	0.5 in (12.7 mm)
Penetration Force	20812 lb (9440 kg)
Pry-Out Force	27794 lb (12607 kg)
Machine Length Increase, Beam Raised	40.6 in (1031 mm)
Rear – Working Width	84 in (2133 mm)
Rear – Scarifier Shank Holders	9
Rear – Scarifier Shank Holder Spacing	10.5 in (267 mm)
Front-Top/Bottom Plate – Width	12 in (305 mm)
Front-Top/Bottom Plate – Thickness	0.87 in (22 mm)
Front Axle – Height to Center	23.5 in (596 mm)
Front Axle – Wheel Lean – Left/Right	18°
Front Axle – Total Oscillation per Side	32°
Number of Cylinders	6
Derating Altitude	10000 ft (3050 m)
High Ambient – Fan Speed – Maximum	1,550 rpm
High Ambient – Fan Speed – Minimum	500 rpm
High – Ambient Capability	122 °F (50 °C)
Height	19.9 in (506 mm)
Width	7.9 in (201 mm)
Sidewall Thickness – Inner	0.63 in (16 mm)
Sidewall Thickness – Outer	0.71 in (18 mm)
Drive Chain Pitch	2 in (50.8 mm)
Wheel Axle Spacing	60 in (1523 mm)
Tandem Oscillation – Front Up	15°
Tandem Oscillation – Front Down	25°
Height – Top of Cab	130 in (3308 mm)
Length – Counterweight to Ripper	399 in (10136 mm)
Width – Outside Front Tires	98.9 in (2511 mm)
Length – Front Axle to Mid Tandem	241 in (6123 mm)
Length – Front Tire to Rear of Machine	351 in (8912 mm)
Length – Front Axle to Moldboard	100 in (2552 mm)
Length – Between Tandem Axles	60 in (1523 mm)
Width – Outside Rear Tires	98.9 in (2511 mm)
Width – Tire Center Lines	84.3 in (2140 mm)
Height – Front Axle Center	23.5 in (596 mm)
Height – Exhaust Stack	128 in (3256 mm)
Height – Top of Cylinders	120 in (3040 mm)
Ground Clearance – Rear Axle	13.3 in (339 mm)
Engine Oil	7.9 gal (US) (30 l)
Tandem Housing – Each	20 gal (US) (76 l)
Front Wheel Spindle Bearing Housing	0.13 gal (US) (0.5 l)
Circle Drive Housing	1.8 gal (US) (7 l)

Click to enlarge

150 Motor Grader

Request
Info

SPECS SUMMARY

Net Power Range (Tier 4)	200 HP (149 kW)
Operating Weight – Typically Equipped	43950 lb (19935 kg)
Blade Width	12 ft (3.7 m)
Engine Model	Cat® C9.3

Reduce your carbon footprint with the latest in emissions reduction technology with the durable 150 motor grader. The 150 motor grader unites comfortability and productivity to get optimal performance on the jobsite. Get the best visibility with angled cab doors, tapered engine enclosure, and sloped rear window.

Compare

Add to wishlist

SKU: 7c69333d85c5 Category: Motor Graders

Description
Shipping & Delivery

Description

Net Power Range (Tier 4)	200 HP (149 kW)
Operating Weight – Typically Equipped	43950 lb (19935 kg)
Blade Width	12 ft (3.7 m)
Engine Model	Cat® C9.3
Gross Vehicle Weight – Maximum – Front Axle	17075 lb (7745 kg)
Gross Vehicle Weight – Maximum – Rear Axle	38069 lb (17268 kg)
Operating Weight – Typically Equipped – Front Axle	12549 lb (5692 kg)
Operating Weight – Typically Equipped – Rear Axle	31401 lb (14243 kg)
Gross Vehicle Weight – Base – Front Axle	9601 lb (4355 kg)
Gross Vehicle Weight – Base – Rear Axle	28590 lb (12968 kg)
Gross Vehicle Weight – Maximum – Total	55144 lb (25013 kg)
Bore	4.5 in (115 mm)
Stroke	5.9 in (149 mm)
Top Speed – Forward	29 mile/h (46.6 km/h)
Top Speed – Reverse	23 mile/h (36.8 km/h)
Turning Radius – Outside Front Tires	25.59 ft (7.8 m)
Steering Range – Left/Right	50°
Articulation Angle – Left/Right	20°
Fuel Capacity	104 gal (US) (394 l)
Speed at Rated Power	2,000 rpm
Forward/Reverse Gears	8 Forward/6 Reverse
Transmission	APECS, Direct Drive, Powershift
Brakes – Service	Multiple Oil Disc
Brakes – Service – Surface Area	3565 in² (23000 cm²)
Circuit Type	Parallel
Pump Type	Variable Piston
Pump Output	55.7 gal/min (210 l/min)
Maximum System Pressure	3500 psi (24150 kPa)
Reservoir Tank Capacity	16.9 gal (US) (64 l)
Standby Pressure	885 psi (6100 kPa)
Drawbar – Width	3 in (76.2 mm)
Forward – 1st	2.5 mile/h (4.1 km/h)
Forward – 2nd	3.4 mile/h (5.5 km/h)
Forward – 3rd	5 mile/h (8 km/h)
Forward – 4th	6.9 mile/h (11 km/h)
Forward – 5th	10.6 mile/h (17.1 km/h)
Forward – 6th	14.5 mile/h (23.3 km/h)
Forward – 7th	19.9 mile/h (32 km/h)
Forward – 8th	29 mile/h (46.6 km/h)
Reverse – 1st	2 mile/h (3.2 km/h)
Reverse – 2nd	3.7 mile/h (6 km/h)
Reverse – 3rd	5.4 mile/h (8.7 km/h)
Reverse – 4th	8.4 mile/h (13.5 km/h)
Reverse – 5th	15.7 mile/h (25.3 km/h)
Reverse – 6th	23 mile/h (36.8 km/h)
Brakes – Parking	Multiple Oil Disc
Brakes – Secondary	Dual Circuit
Circle – Diameter	60.2 in (1530 mm)
Circle – Blade Beam Thickness	1.6 in (40 mm)
Drawbar – Height	6 in (152 mm)
Moldboard – Height	24 in (610 mm)
Moldboard – Thickness	0.87 in (22 mm)
Arc Radius	16.3 in (413 mm)
Throat Clearance	6.5 in (166 mm)
Cutting Edge Width	6 in (152 mm)
Cutting Edge Thickness	0.6 in (16 mm)
End Bit – Width	6 in (152 mm)
End Bit – Thickness	0.6 in (16 mm)
Blade Pull – Base GVW	25732 lb (11672 kg)
Blade Pull – Maximum GVW	34262 lb (15541 kg)
Blade Down Pressure – Base GVW	16480 lb (7475 kg)
Circle Centershift – Right	28.7 in (728 mm)
Blade Down Pressure – Maximum GVW	29308 lb (13294 kg)
Circle Centershift – Left	27.4 in (695 mm)
Moldboard Sideshift – Right	26 in (660 mm)
Moldboard Sideshift – Left	20.1 in (510 mm)
Maximum Blade Position Angle	90°
Blade Tip Range – Forward	40°
Blade Tip Range – Backward	5°
Maximum Shoulder Reach Outside of Tires – Right	77.9 in (1978 mm)
Maximum Shoulder Reach Outside of Tires – Left	70.5 in (1790 mm)
Maximum Lift Above Ground	18.9 in (480 mm)
Maximum Depth of Cut	28.1 in (715 mm)
Cooling System	15 gal (US) (57 l)
Hydraulic System – Total	26.4 gal (US) (100 l)
Hydraulic System – Tank	16.9 gal (US) (64 l)
ROPS/FOPS	ISO 3471/ISO 3449
Mid, V-Type – Scarifier Shank Holders	11
Front, V-Type, 5 or 11 Tooth – Scarifying Depth, Maximum	18.4 in (467 mm)
Sound	ISO 6394; ISO 6395
Rear – Scarifying Depth, Maximum	16.8 in (426 mm)
Mid, V-Type – Working Width	46.6 in (1184 mm)
Front, V-Type – Working Width	47.4 in (1205 mm)
Front, V-Type, 5 or 11 Tooth – Working Width	40.6 in (1031 mm)
Mid, V-Type – Scarifying Depth, Maximum	11.5 in (292 mm)
Mid, V-Type – Scarifier Shank Holder Spacing	4.6 in (116 mm)
Ripper Shank Holder Spacing	21 in (533 mm)
Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holder Spacing	4.6 in (116 mm)
Gross Vehicle Weight – Base – Total	38191 lb (17323 kg)
Brakes	ISO 3450
Moldboard – Blade Width	12 ft (3.7 m)
Operating Weight – Typically Equipped – Total	43950 lb (19935 kg)
Steering	ISO 5010
Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holders	11-May
Ripping Depth – Maximum	16.8 in (426 mm)
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
VHP Plus – Gear – Net Power – Reverse 2nd	210 HP (156 kW)
Front Frame Structure – Width	12 in (305 mm)
VHP Plus – Gear – Net Power – Forward 3rd	220 HP (164 kW)
Torque Rise	39%
VHP Plus – Gear – Net Power – Forward 4th	231 HP (172 kW)
VHP Plus – Gear – Net Power – Reverse 3rd-6th	220 HP (164 kW)
Standard Capability	109 °F (43 °C)
Transmission – Differential – Final Drives	18.5 gal (US) (70 l)
Diesel Exhaust Fluid	5.8 gal (US) (22 l)
VHP Plus Range – Net – Metric	149-188 kW (202-255 hp)
Base Power (1st Gear) – Net – Metric	202 HP (149 kW)
High Ambient – Fan Speed – Standard	1,400 rpm
VHP Plus – Gear – Net Power – Forward 7th	247 HP (184 kW)
VHP Plus – Gear – Net Power – Forward 5th	236 HP (176 kW)
Front Frame Structure – Height	12.6 in (321 mm)
VHP Plus – Gear – Net Power – Forward 6th	241 HP (180 kW)
VHP Plus – Gear – Net Power – Reverse 1st	200 HP (149 kW)
VHP Plus – Gear – Net Power – Forward 1st	200 HP (149 kW)
Maximum Torque – VHP Plus	920 lb/ft (1247 N·m)
VHP Plus – Gear – Net Power – Forward 8th	252 HP (188 kW)
Circle – Height	5.4 in (138 mm)
VHP Plus Range – Net	149-188 kW (200-252 hp)
VHP Plus – Gear – Net Power – Forward 2nd	210 HP (156 kW)
Emissions	U.S. EPA Tier 4 Final/EU Stage V
Ripper Shank Holders	5
Displacement	567.5 in³ (9.3 l)
Drawbar – Thickness	0.5 in (12.7 mm)
Penetration Force	20812 lb (9440 kg)
Pry-Out Force	27794 lb (12607 kg)
Machine Length Increase, Beam Raised	40.6 in (1031 mm)
Rear – Working Width	84 in (2133 mm)
Rear – Scarifier Shank Holders	9
Rear – Scarifier Shank Holder Spacing	10.5 in (267 mm)
Front-Top/Bottom Plate – Width	12 in (305 mm)
Front-Top/Bottom Plate – Thickness	0.87 in (22 mm)
Front Axle – Height to Center	23.5 in (596 mm)
Front Axle – Wheel Lean – Left/Right	18°
Front Axle – Total Oscillation per Side	32°
Number of Cylinders	6
Derating Altitude	10000 ft (3050 m)
High Ambient – Fan Speed – Maximum	1,550 rpm
High Ambient – Fan Speed – Minimum	500 rpm
High – Ambient Capability	122 °F (50 °C)
Height	19.9 in (506 mm)
Width	7.9 in (201 mm)
Sidewall Thickness – Inner	0.63 in (16 mm)
Sidewall Thickness – Outer	0.71 in (18 mm)
Drive Chain Pitch	2 in (50.8 mm)
Wheel Axle Spacing	60 in (1523 mm)
Tandem Oscillation – Front Up	15°
Tandem Oscillation – Front Down	25°
Height – Top of Cab	130 in (3308 mm)
Length – Counterweight to Ripper	399 in (10136 mm)
Width – Outside Front Tires	98.9 in (2511 mm)
Length – Front Axle to Mid Tandem	241 in (6123 mm)
Length – Front Tire to Rear of Machine	351 in (8912 mm)
Length – Front Axle to Moldboard	100 in (2552 mm)
Length – Between Tandem Axles	60 in (1523 mm)
Width – Outside Rear Tires	98.9 in (2511 mm)
Width – Tire Center Lines	84.3 in (2140 mm)
Height – Front Axle Center	23.5 in (596 mm)
Height – Exhaust Stack	128 in (3256 mm)
Height – Top of Cylinders	120 in (3040 mm)
Ground Clearance – Rear Axle	13.3 in (339 mm)
Engine Oil	7.9 gal (US) (30 l)
Tandem Housing – Each	20 gal (US) (76 l)
Front Wheel Spindle Bearing Housing	0.13 gal (US) (0.5 l)
Circle Drive Housing	1.8 gal (US) (7 l)