| Net Power – ISO 9249 |
73 HP (54.3 kW) |
| Operating Weight |
30400 lb (13800 kg) |
| Maximum Digging Depth |
19.8 ft (6040 mm) |
| Engine Model |
Cat C3.6 |
| Engine Power – ISO 14396 |
74 HP (55.4 kW) |
| Engine Power – ISO 14396 (DIN) |
75 hp (metric) (75 hp (metric)) |
| Net Power – ISO 9249 (DIN) |
74 hp (metric) (74 hp (metric)) |
| Bore |
4 in (98 mm) |
| Stroke |
5 in (120 mm) |
| Main System – Maximum Flow |
247 L/min (65 gal/min) |
| Displacement |
220 in³ (3.6 l) |
| Maximum Pressure – Equipment |
5075 psi (35000 kPa) |
| Biodiesel Capability |
Up to B20¹ |
| Maximum Pressure – Travel |
5075 psi (35000 kPa) |
| Emissions |
Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards |
| Note (1) |
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,400 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture. |
| Maximum Pressure – Swing |
3770 psi (26000 kPa) |
| Note (2) |
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. |
| Swing Speed |
11.5 r/min (11.5 r/min) |
| Maximum Swing Torque |
25888 ft·lbf (35 kN·m) |
| Fuel Tank Capacity |
68.2 gal (US) (258 l) |
| Cooling System |
4 gal (US) (15 l) |
| Engine Oil |
2.1 gal (US) (8 l) |
| Final Drive – Each |
0.8 gal (US) (3 l) |
| Hydraulic System – Including Tank |
22.5 gal (US) (85 l) |
| Hydraulic Tank |
18.5 gal (US) (70 l) |
| Boom |
Reach 4.65 m (15’3″) |
| Stick |
Reach R3.0 m (9’8″) |
| Bucket |
GD 0.53 m³ (0.69 yd³) |
| Shipping Height – Top of Cab |
9.2 ft (2810 mm) |
| Handrail Height |
9.2 ft (2810 mm) |
| Shipping Length |
25.5 ft (7780 mm) |
| Shipping Length – with Blade |
26.4 ft (8050 mm) |
| Tail Swing Radius |
7.1 ft (2190 mm) |
| Counterweight Clearance |
3 ft (916 mm) |
| Ground Clearance |
1.4 ft (446 mm) |
| Track Length |
12.3 ft (3750 mm) |
| Length to Center of Rollers |
9.9 ft (3040 mm) |
| Track Gauge |
6.5 ft (1990 mm) |
| Transport Width |
8.1 ft (2490 mm) |
| Boom |
Reach 4.65 m (15’3″) |
| Stick |
Reach R3.0 m (9’8″) |
| Bucket |
GD 0.53 m³ (0.69 yd³) |
| Maximum Reach at Ground Level |
28.4 ft (8660 mm) |
| Maximum Cutting Height |
28.9 ft (8830 mm) |
| Maximum Loading Height |
21 ft (6420 mm) |
| Minimum Loading Height |
5.2 ft (1600 mm) |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom |
19.2 ft (5860 mm) |
| Maximum Vertical Wall Digging Depth |
17 ft (5190 mm) |
| Minimum Working Equipment Radius |
8.4 ft (2570 mm) |
| Bucket Digging Force – ISO |
22180 lbf (98.67 kN) |
| Stick Digging Force – ISO |
13330 lbf (59.29 kN) |
| Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 hg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes. |
