| Net Power – ISO 9249 |
542 HP (404 kW) |
| Operating Weight |
207400 lb (94000 kg) |
| Maximum Digging Depth |
31.9 ft (9670 mm) |
| Net Power – ISO 9249 (DIN) |
550 hp (metric) (550 hp (metric)) |
| Engine Model |
Cat C18 |
| Engine Power – ISO 14396 |
543 HP (405 kW) |
| Note (1) |
Long Variable Gauge undercarriage, GP boom, R4.4HB2 (14’5″) stick, SD 5.2 m³ (6.8 yd³) bucket, 900 mm (35″) double grouser shoes and counterweight with removal device. |
| Engine Power – ISO 14396 (DIN) |
551 hp (metric) (551 hp (metric)) |
| Bore |
6 in (145 mm) |
| Stroke |
7 in (183 mm) |
| Displacement |
1105 in³ (18.1 l) |
| Biodiesel Capability |
B20¹ |
| Emissions |
Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
| Note (1) |
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 1,700 rpm. Advertised power is tested per the specified standard in effect at time of manufacture. |
| Note (2) |
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels. |
| Main System – Maximum Flow – Implement |
281 gal/min (1064 l/min) |
| Maximum Pressure – Equipment |
5366 psi (37000 kPa) |
| Maximum Pressure – Travel |
5076 psi (35000 kPa) |
| Maximum Pressure – Swing |
4496 psi (31000 kPa) |
| Swing Speed |
6.26 r/min (6.26 r/min) |
| Maximum Swing Torque |
267333 ft·lbf (362 kN·m) |
| Fuel Tank Capacity |
322 gal (US) (1220 l) |
| Cooling System |
19 gal (US) (71 l) |
| Engine Oil |
18 gal (US) (67 l) |
| Swing Drive |
6 gal (US) (24 l) |
| Final Drive – Each |
5 gal (US) (20 l) |
| Hydraulic System – Including Tank |
196 gal (US) (740 l) |
| Hydraulic Tank |
98 gal (US) (372 l) |
| DEF Tank |
21 gal (US) (80 l) |
| Boom |
GP 8.4m (25’7″) |
| Stick |
R4.4m (14’5″) |
| Bucket |
SD 5.2m³ (6.8 yd³) |
| Shipping Height – Top of Cab |
12 ft (3670 mm) |
| Handrail Height |
12.4 ft (3750 mm) |
| Shipping Length |
49.6 ft (15090 mm) |
| Tail Swing Radius |
15.11 ft (4840 mm) |
| Counterweight Clearance |
5.5 ft (1640 mm) |
| Ground Clearance |
2.9 ft (830 mm) |
| Track Length |
6350 mm (20.1 ft) |
| Track Length to Center of Rollers |
16.1 ft (5120 mm) |
| Track Gauge |
11.6 ft (3510 mm) |
| Transport Width |
12.9 ft (3880 mm) |
| Note |
Track gauge undercarriage extended with 900 mm (35″) shoes; transport width undercarriage retracted with 900 mm (35″) shoes and no steps |
| Boom |
GP 8.4m (25’7″) |
| Stick |
R4.4m (14’5″) |
| Bucket |
SD 5.2m³ (6.8 yd³) |
| Maximum Reach at Ground Level |
48.3 ft (14710 mm) |
| Maximum Cutting Height |
44.5 ft (13540 mm) |
| Maximum Loading Height |
30.4 ft (9250 mm) |
| Minimum Loading Height |
9.11 ft (3030 mm) |
| Maximum Depth Cut for 2440 mm (8 ft) Level Bottom |
31.4 ft (9560 mm) |
| Maximum Vertical Wall Digging Depth |
22.3 ft (6770 mm) |
| Bucket Digging Force – ISO |
86100 ft·lbf (383 kN) |
| Stick Digging Force – ISO |
68540 ft·lbf (305 kN) |
| Recyclability |
98% |
| Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.00 kg (2.2lb) of refrigerant, which has a CO2 equivalent of 1.430 metric tonnes (1.576 tons). |
