| Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011 |
404 HP (301 kW) |
| Operating Weight |
78264 lb (35510 kg) |
| Bucket Range |
4.8-17.2 m³ 6.25-22.5 yd³ |
| Engine Model |
Cat C13 |
| Note (1) |
Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards. |
| Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment. |
| Note |
Weight based on a machine configuration with Bridgestone 875/65R29 VLTS L4 radial tires, full fluids, operator, standard counterweight, ride control, cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound suppression, and a 6.1 m³ (8.0 yd³) general purpose bucket with BOCE. |
| Forward – 1 |
3.9 mile/h (6.2 km/h) |
| Forward – 2 |
7.3 mile/h (11.8 km/h) |
| Forward – 3 |
13 mile/h (20.9 km/h) |
| Forward – 4 |
24.5 mile/h (39.5 km/h) |
| Note |
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 914 mm (36 in) roll radius. |
| Reverse – 1 |
4.4 mile/h (7.1 km/h) |
| Reverse – 2 |
8.4 mile/h (13.5 km/h) |
| Reverse – 3 |
17.4 mile/h (28 km/h) |
| Note (1) |
* For machines in European Union countries and in countries that adopt the “EU Directives.” |
| Note (2) |
European Union Directive “2000/14/EC” as amended by “2005/88/EC.” |
| With Cooling Fan Speed at 70% of Maximum Value – Exterior Sound Power Level* |
107 |
| With Cooling Fan Speed at 70% of Maximum Value – Operator Sound Pressure Level (ISO 6396:2008) |
70 dB(A) (70 dB(A)) |
| With Cooling Fan Speed at Maximum Speed – Exterior Sound Power Level (ISO 6395:2008) |
110 dB(A) (110 dB(A)) |
| With Cooling Fan Speed at Maximum Speed – Exterior Sound Pressure Level (SAE J88:2013) |
75 |
| With Cooling Fan Speed at Maximum Speed – Operator Sound Pressure Level (ISO 6396:2008) |
70 dB(A) (70 dB(A)) |
| Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons). |
| Breakout Force |
59060 lbf (262 kN) |
| Note (1) |
For a machine configuration as defined under Weight. |
| Note (2) |
Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. |
| Static Tipping Load – Full 40° Turn – No Tire Deflection |
22418 kg (49410 lb) |
| Static Tipping Load – Full 40° Turn – With Tire Deflection |
46526 lb (21110 kg) |
| Cooling System |
13.7 gal (US) (52 l) |
| Crankcase |
9.8 gal (US) (37 l) |
| DEF Tank |
5.5 gal (US) (21 l) |
| Differential – Final Drives – Front |
24.3 gal (US) (92 l) |
| Differential – Final Drives – Rear |
24.3 gal (US) (92 l) |
| Fuel Tank |
112.5 gal (US) (426 l) |
| Hydraulic Tank |
40.4 gal (US) (153 l) |
| Transmission |
20.3 gal (US) (77 l) |
| Implement System – Maximum Operating Pressure |
4975 psi (34300 kPa) |
| Implement System – Maximum Pump Output at 2,250 rpm |
119 gal/min (449 l/min) |
| Note |
All dimensions are approximate and based on machine equipped with 6.1 m3 (8.0 yd3) general purpose bucket with BOCE and Bridgestone 875/65R29 VLTS L4 radial tires. |
| Centerline of Rear Axle to Edge of Counterweight |
9.4 ft (2843 mm) |
| Centerline of Rear Axle to Hitch |
6.3 ft (1900 mm) |
| Ground Clearance |
1.4 ft (428 mm) |
| Height – Top of Exhaust Pipe |
12.4 ft (3736 mm) |
| Height – Top of Hood |
10 ft (3036 mm) |
| Height – Top of ROPS |
12.6 ft (3801 mm) |
| Hinge Pin Height at Carry |
2.11 ft (896 mm) |
| Hinge Pin Height at Maximum Lift |
16.1 ft (5150 mm) |
| Lift Arm Clearance at Maximum Lift |
13.4 ft (4069 mm) |
| Overall Length – Without Bucket |
29.11 ft (9104 mm) |
| Tread Width |
8.4 ft (2540 mm) |
| Wheel Base |
12.6 ft (3800 mm) |
| Centerline of Rear Axle to Edge of Counterweight |
8.95 ft (2729 mm) |
| Centerline of Rear Axle to Hitch |
6.3 ft (1900 mm) |
| Ground Clearance |
428 mm (1.4 ft) |
| Height – Top of Exhaust Pipe |
3736 mm (12.4 ft) |
| Height – Top of Hood |
3036 mm (10 ft) |
| Height – Top of ROPS |
3801 mm (12.6 ft) |
| Hinge Pin Height at Carry |
2.7 ft (791 mm) |
| Hinge Pin Height at Maximum Lift |
4741 mm (15.6 ft) |
| Lift Arm Clearance at Maximum Lift |
3902 mm (12.9 ft) |
| Overall Length – Without Bucket |
8597 mm (28.3 ft) |
| Tread Width |
8.4 ft (2540 mm) |
| Wheel Base |
3800 mm (12.6 ft) |
| Hydraulic Cycle Time – Total |
10.1 seconds |
| Width over Tires (Loaded) |
11.5 ft (3471 mm) |
| Engine Torque @ 1,200 rpm – ISO 14396:2002 |
1620 lb/ft (2197 N·m) |
| Displacement |
12.5L |
| Engine Power @ 1,700 rpm – ISO 14396:2002 |
432 HP (322 kW) |
| Width over Tires (Loaded) |
11.5 ft (3471 mm) |
| Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011 |
1515 lb/ft (2054 N·m) |
| Gross Power @ 1,700 rpm – SAE J1995:2014 |
436 HP (325 kW) |
| Gross Torque @ 1,200 rpm – SAE J1995:2014 |
1636 lb/ft (2218 N·m) |
| Note (3) |
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to- liquid) fuels Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel. |
