Specifications
| Engine Model | Cat® C15 |
| Engine Power – Tier 3 Engine – ISO 14396:2002 | 401 HP (299 kW) |
| Nominal Payload Capacity | 66139 lb (30000 kg) |
| Engine Power – VR Engine – ISO 14396:2002 | 401 HP (299 kW) |
| Gross Machine Mass | 132300 lb (60000 kg) |
| Body 1 | 14.8 yd³ (11.3 m³) |
| Bore | 5.4 in (137.2 mm) |
| Empty – Front Axle | 67.50% |
| Empty – Rear Axle | 32.50% |
| Stroke | 6.8 in (171.5 mm) |
| Loaded – Front Axle | 44.20% |
| Empty | 63647 lb (28870 kg) |
| Displacement | 928 in³ (15.2 l) |
| Note (1) | Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
| Note (2) | All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (7.05-7.09 lb/gal @ 59° F) and fuel inlet temperature 40° C (104° F). |
| Empty – Front Axle | 42944 lb (19479 kg) |
| Loaded – Rear Axle | 55.80% |
| Note (3) | Engine derate will commence at an altitude of 2743 m (8,999 ft). |
| Note (4) | Optional Ventilation Reduction package available. Optional engine with emissions equivalent to Tier 3 and EU Stage IIIA is also available. |
| Empty – Rear Axle | 20704 lb (9391 kg) |
| Note (5) | Optional engine with emissions equivalent to U.S. EPA Tier 3 and EU stage IIIA is also available. |
| Loaded | 132277 lb (60000 kg) |
| Loaded – Front Axle | 58451 lb (26513 kg) |
| Raise | 10.5 s (10.5 s) |
| Lower | 11.2 s (11.2 s) |
| Total Cycle Time | 21.7 s (21.7 s) |
| Outside Clearance Radius | 337.4 in (8571 mm) |
| Inner Clearance Radius | 198 in (5030 mm) |
| Articulation Angle | 42.5 ° (42.5 °) |
| Engine Crankcase – With Filter | 9 gal (US) (34 l) |
| Forward – 1 | 3.9 mile/h (6.3 km/h) |
| Forward – 2 | 7 mile/h (11.3 km/h) |
| Forward – 3 | 12.9 mile/h (20.8 km/h) |
| Forward – 4 | 22.8 mile/h (36.7 km/h) |
| Reverse – 1 | 4.4 mile/h (7.1 km/h) |
| Body 2 – Standard Body | 18.8 yd³ (14.4 m³) |
| Body 3 | 22.9 yd³ (17.5 m³) |
| Wide Body | 21.9 yd³ (16.8 m³) |
| Ejector Body (1) | 19.9 yd³ (15.2 m³) |
| Ejector Body (2) | 21.9 yd³ (16.8 m³) |
| Tire Size | 26.5 × R25 |
| Differential Ratio | 3.38:1 |
| Final Drive Ratio | 4.76:1 |
| Total Reduction Ratio | 16.13:1 |
| Transmission | 18 gal (US) (67 l) |
| Hydraulic Tank | 38 gal (US) (145 l) |
| Cooling System | 20 gal (US) (74 l) |
| Front Differential and Final Drives | 15 gal (US) (56 l) |
| Rear Differential and Final Drives | 15 gal (US) (56 l) |
| Fuel Tank | 108 gal (US) (410 l) |
| Frame Oscillation | 10 Degrees |
| Standards | ROPS/FOPS Certified Cab |
| Note | Maximum travel speeds with standard 26.5 × R25 tires. |
| Note | Heaped SAE 2:1. |
| Note | Fully floating axles. |
| Loaded – Rear Axle | 73826 lb (33487 kg) |
| Body Capacities | 11.3-17.5 m³ (14.8-22.9 yd³) |
