Specifications
| Engine Model | Cat® C27 |
| Engine Power – Net SAE J1349/ISO 9249** – Forward | 602 HP (449 kW) |
| Operating Weight | 154888 lb (70256 kg) |
| Shoe Type | Extreme Service (ES) |
| ROPS | Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008. |
| Width – Shoe | 24 in (610 mm) |
| FOPS | Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II. |
| Steering Type | Hydraulically Applied Multiple-Disc Steering Clutch |
| Maximum penetration force * (shank vertical) | 53055 lbf (236 kN) |
| 1.0 Forward | 2.5 mile/h (4 km/h) |
| Brake Type | Spring Applied Multiple- Disc Brake |
| Pump Type | Variable displacement piston |
| Maximum penetration force * (shank vertical) | 49233 lbf (219 kN) |
| Fuel Tank – Usable Volume | 323.3 gal (US) (1224 l) |
| Engine Model | Cat® C27 |
| Engine Power – Gross SAE J1995* – Forward | 631 HP (471 kW) |
| Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes. |
| 10SU ABR – Capacity (SAE J1265) | 24.2 yd³ (18.5 m³) |
| Sound | Operator Sound Pressure Level (ISO 6396:2008): 78 db(A) |
| Shipping Weight | 111739 lb (50684 kg) |
| Fuel Tank – Total Volume | 335.2 gal (US) (1269 l) |
| Pump Output – Implement | 112 gal/min (424 l/min) |
| 1.5 Forward | 3.4 mile/h (5.4 km/h) |
| 10SU ABR – Width (over end bits) | 194.5 in (4940 mm) |
| Maximum penetration depth (standard tip) | 78.3 in (1988 mm) |
| Ground Clearance* | 28.5 in (725 mm) |
| Engine Power – Gross SAE J1995* – Reverse | 766 HP (571 kW) |
| Engine Power – Net SAE J1349/ISO 9249** – Forward | 603 HP (450 kW) |
| Shoes/Side | 44 |
| Maximum penetration depth (standard tip) | 59.2 in (1504 mm) |
| Note | The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained. |
| Sound (1) | Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A) |
| Engine Power – ISO 14396* – Forward | 620 HP (462 kW) |
| 2.0 Forward | 4.5 mile/h (7.2 km/h) |
| Note (1) | Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi). |
| Grouser Height | 3.7 in (93 mm) |
| Note (1) | D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. |
| Brake Diameter | 15.4 in (392 mm) |
| Track Gauge | 100.4 in (2550 mm) |
| 10SU ABR – Height | 83.5 in (2120 mm) |
| Cooling System Refill – Tier 4 Final Engine | 46.2 gal (US) (175 l) |
| Engine Power – Net SAE J1349/ISO 9249** – Reverse | 722 HP (538 kW) |
| Engine Power – ISO 14396* – Reverse | 754 HP (563 kW) |
| Maximum Clearance Raised – Under Tip, Pinned in Bottom Hole | 36 in (912 mm) |
| 10SU ABR – Digging Depth – Blade Pitch: Full Racked Back (Carry) | 19.98 in (507.47 mm) |
| Note (1) | The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
| Engine Crankcase Sump | 27.2 gal (US) (103 l) |
| Note (2) | D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes. |
| Width – Without Trunnions – 610 mm/24 in ES | 130.4 in (3311 mm) |
| Fan Pump | 21.7 gal/min (82 l/min) |
| Engine Power – Gross SAE J1995* – Forward | 631 HP (471 kW) |
| 2.5 Forward | 6 mile/h (9.6 km/h) |
| 10SU ABR – Digging Depth – Blade Pitch: Nominal | 25.23 in (640.87 mm) |
| Note (2) | The sound levels listed above include both measurement uncertainty and uncertainty due to production variation. |
| Pitch | 10.2 in (260 mm) |
| 3.0 Forward | 7.8 mile/h (12.5 km/h) |
| Engine Power – Gross SAE J1995* – Reverse | 766 HP (571 kW) |
| Note (2) | Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi). |
| Width – Over Trunnions | 148 in (3759 mm) |
| Power Train – Total Volume | 81.4 gal (US) (308 l) |
| Ground Clearance | 28.5 in (725 mm) |
| Weight | 14209 lb (6445 kg) |
| Brake Count | 10 |
| Weight | 14548 lb (6599 kg) |
| Note (3) | The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A). |
| Engine Power – ISO 14396* – Forward | 622 HP (464 kW) |
| 10SU ABR – Digging Depth – Blade Pitch: Full Pitched Forward (Spread) | 30.08 in³ (764.12 mm) |
| Height – FOPS Cab* | 162.8 in (4134 mm) |
| Tilt Cylinder Flow – Rod End Flow | 112 gal/min (424 l/min) |
| Power Train – Refill Volume | 74.8 gal (US) (283 l) |
| 1.0 Reverse | 3.2 mile/h (5.2 km/h) |
| Engine Power – Net SAE J1349/ISO 9249** – Reverse | 722 HP (538 kW) |
| 1.5 Reverse | 4.2 mile/h (6.7 km/h) |
| Height – Top of Stack* | 171.5 in (4356 mm) |
| 10SU ABR – Ground Clearance – Blade Pitch: Full Racked Back (Carry) | 66.14 in (1680 mm) |
| Note | Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. |
| Note | Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank. |
| Engine Power – ISO 14396* – Reverse | 756 HP (564 kW) |
| Tilt Cylinder Flow – Head End Flow | 63.4 gal/min (240 l/min) |
| Displacement | 1648 in³ (27 l) |
| Final Drives (each) | 12.2 gal (US) (46 l) |
| Height – ROPS/Canopy* | 173.5 in (4406 mm) |
| Track Roller Frames (each) | 16.9 gal (US) (64 l) |
| Displacement | 1648 in³ (27 l) |
| Lift Cylinder Relief Valve Setting | 4061.1 psi (28000 kPa) |
| Stroke | 6 in (152 mm) |
| Track Gauge | 100.4 in (2550 mm) |
| 2.0 Reverse | 5.6 mile/h (9 km/h) |
| Note (1) | *Includes grouser height for total dimensions on hard surfaces. |
| 10SU ABR – Ground Clearance – Blade Pitch: Full Pitched Forward (Spread) | 53.86 in (1368 mm) |
| 2.5 Reverse | 7.5 mile/h (12.1 km/h) |
| Bore | 5.4 in (137 mm) |
| Tilt Cylinder Relief Valve Setting | 3872.5 psi (26700 kPa) |
| Bore | 5.4 in (137 mm) |
| Length – Track on Ground | 152.8 in (3880 mm) |
| Pivot Shaft Oil | 9.5 gal (US) (36 l) |
| Ground Contact Area | 7347 in² (4.74 m²) |
| Stroke | 6 in (152 mm) |
| 3.0 Reverse | 9.8 mile/h (15.7 km/h) |
| Length – Track on Ground | 152.8 in (3880 mm) |
| Hydraulic System Tank | 32.2 gal (US) (122 l) |
| Ripper – Lift – Relief Valve Setting | 4061.1 psi (28000 kPa) |
| 10SU ABR – Ground Clearance – Maximum Tilt LH | 56.3 in (1430 mm) |
| Emissions | U.S. EPA Tier 4 Final/EU Stage V |
| Transmission Clutch Diameter | 17 in (431.8 mm) |
| Overall Length – Basic Tractor | 209.6 in (5324 mm) |
| Ripper – Pitch – Relief Valve Setting | 4061.1 psi (28000 kPa) |
| Emissions | U.S. EPA Tier 2 Equivalent |
| 10SU ABR – Ground Clearance – Maximum Tilt RH | 56.3 in (1430 mm) |
| Tank Capacity | 32.2 gal (US) (122 l) |
| Length – With SU-Blade | 292 in (7416 mm) |
| Track Rollers/Side | 8 |
| Number of Carrier Rollers | 1 per side (optional) |
| Length – With U-Blade | 305.1 in (7750 mm) |
| Cylinder Sizing – Blade Lift – Bore | 5.5 in (140 mm) |
| Length – With Single-Shank Ripper | 278.8 in (7081 mm) |
| Cylinder Sizing – Blade Tilt – Bore | 8.3 in (210 mm) |
| Length – With Multi-Shank Ripper | 285.1 in (7241 mm) |
| Cylinder Sizing – Ripper Shank Lift – Bore | 8.3 in (209.6 mm) |
| Cylinder Sizing – Ripper Shank Angle – Bore | 7.1 in (180 mm) |
| Type | Planetary powershift |
| Overall Length – SU-Blade/SS Ripper | 360.6 in (9158 mm) |
| Cylinder Sizing – Blade Lift – Stroke | 65.1 in (1653 mm) |
| Cylinder Sizing – Blade Tilt – Stroke | 9.5 in (241 mm) |
| Cylinder Sizing – Ripper Shank Lift – Stroke | 21.1 in (535 mm) |
| Cylinder Sizing – Ripper Shank Angle – Stroke | 26 in (660 mm) |
| 10U ABR – Capacity (SAE J1265) | 28.7 yd³ (22 m³) |
| 10U ABR – Width (over end bits) | 207.1 in (5260 mm) |
| 10U ABR – Height | 83.5 in (2120 mm) |
| 10U ABR – Digging Depth – Blade Pitch: Full Racked Back (Carry) | 19.98 in (507.5 mm) |
| 10U ABR – Digging Depth – Blade Pitch: Nominal | 60 in (640.9 mm) |
| 10U ABR – Digging Depth – Blade Pitch: Full Pitched Forward (Spread) | 30.1 in (764.1 mm) |
| 10U ABR – Ground Clearance – Blade Pitch: Full Racked Back (Carry) | 66.1 in (1680 mm) |
| 10U ABR – Ground Clearance – Blade Pitch: Full Pitched Forward (Spread) | 53.9 in (1368 mm) |
| 10U ABR – Ground Clearance – Maximum Tilt LH | 60.8 in (1545 mm) |
| 10U ABR – Ground Clearance – Maximum Tilt RH | 60.8 in (1545 mm) |
| 10U ABR – Weights – Blade Weight* | 23585 lb (10698 kg) |
| 10U ABR – Weights – Total Operating Weight** (with blade and SS ripper) | 154888 lb (70256 kg) |
| Note (1) | Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees |
| Note (1) | *Excludes all fan losses. |
| Note (1) | *Excludes all fan losses. |
| Note (2) | All Engine ratings apply at 1,800 rpm. |
| Note (2) | All Engine ratings apply at 1,800 rpm. |
| Note (2) | *Does not include hydraulic controls but includes blade cylinders, pusharms. |
| Note (3) | Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). |
| Note (3) | Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft). |
| Note (4) | Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). |
| Note (4) | Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft). |
| Note (3) | Electro-hydraulic pilot valves assist operations of ripper and dozer controls. |
| Note (5) | **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. |
| Note (5) | **Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature. |
| Note (3) | **D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator. |
