| Engine Model |
Cat® C15 |
| Engine Power – Tier 3 Engine – ISO 14396:2002 |
401 HP (299 kW) |
| Nominal Payload Capacity |
37920 lb (17200 kg) |
| Engine Power – VR Engine – ISO 14396:2002 |
401 HP (299 kW) |
| Bore |
5.4 in (137.2 mm) |
| Stroke |
6.8 in (171.5 mm) |
| Displacement |
927.9 in³ (15.2 l) |
| Note (1) |
Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard. |
| Bucket Capacity |
6.3-8.9 m³ (8.2-11.6 yd³) |
| Note (2) |
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications in 40 CFR Part 1065 and EU specifications in Directive 97/68/EC with a density of 0.845-0.850 kg/L @ 15° C (7.05-7.09 lb/gal @ 59° F) and fuel inlet temperature 40° C (104° F). |
| Note (3) |
No engine derating required up to 591 m (1,938 ft) altitude. |
| Brakes |
ISO 3450, AS2958.1, CAN-CSA424.30-M90 |
| Engine Crankcase |
9 gal (US) (34 l) |
| Operating Mass* |
110692 lb (50209 kg) |
| Dump Bucket – 1 |
8.2 yd³ (6.3 m³) |
| Cab – FOPS |
ISO 3449, SAE J231, AS2294.3, EN13627 |
| Note (4) |
Optional Ventilation Reduction Package available. |
| Transmission |
16.4 gal (US) (62 l) |
| Dump Bucket – 2 |
9.4 yd³ (7.2 m³) |
| Cab – ROPS |
ISO 3471, SAE J1040, AS2294.2, EN13510 |
| Operating Mass* – Front Axle |
50832 lb (23057 kg) |
| Note (5) |
Optional Tier 3 engine package emits equivalent to U.S. EPA Tier 3 and EU Stage IIIA. |
| Dump Bucket – 3 |
10.9 yd³ (8.3 m³) |
| Operating Mass* – Rear Axle |
59860 lb (27152 kg) |
| Hydraulic Tank |
37 gal (US) (140 l) |
| Gross Machine Mass |
155095 lb (70350 kg) |
| Cooling System |
19.8 gal (US) (75 l) |
| Operating Mass + Rated Payload* |
148611 lb (67409 kg) |
| Dump Bucket – 4 |
11.6 yd³ (8.9 m³) |
| Front Differential and Final Drives |
31.4 gal (US) (119 l) |
| Static Tipping Load – Straight Ahead – Lift Arms Horizontal |
88015 lb (39923 kg) |
| Operating Mass + Rated Payload* – Front Axle |
110716 lb (50220 kg) |
| Static Tipping Load – Full Turn – Lift Arms Horizontal |
75109 lb (34069 kg) |
| Rear Differential and Final Drives |
33.5 gal (US) (127 l) |
| Breakout Force – SAE |
60298 lb (27346 kg) |
| Operating Mass + Rated Payload* – Rear Axle |
37895 lb (17189 kg) |
| Front Differential and Final Drives – With Axle Oil Cooling System |
42 gal (US) (159 l) |
| Rear Differential and Final Drives – With Axle Oil Cooling System |
44.1 gal (US) (167 l) |
| Fuel Tank – Dual |
376.4 gal (US) (1425 l) |
| Raise |
9.2 s (9.2 s) |
| Dump |
3.4 s (3.4 s) |
| Lower, Empty, Float Down |
3.1 s (3.1 s) |
| Outside Clearance Radius |
288.3 in (7323 mm) |
| Total Cycle Time |
15.7 s (15.7 s) |
| Inner Clearance Radius |
133.2 in (3383 mm) |
| Axle Oscillation |
8° |
| Articulation Angle |
42.5° |
| Forward – 1 |
3.4 mile/h (5.4 km/h) |
| Forward – 2 |
6 mile/h (9.7 km/h) |
| Forward – 3 |
10.7 mile/h (17.3 km/h) |
| Forward – 4 |
18.5 mile/h (29.8 km/h) |
| Reverse – 1 |
4.1 mile/h (6.6 km/h) |
| Reverse – 2 |
7.3 mile/h (11.8 km/h) |
| Reverse – 3 |
13 mile/h (21 km/h) |
| Reverse – 4 |
22 mile/h (35.5 km/h) |
| Tire Size |
29.5 × 29 |
| Note |
*Calculated Weight. |
